Shopping Cart

Menu

OAK-SoM Pro

OAK-SoM Pro

Original price was: $134.99.Current price is: $67.50.

Availability: In Stock

Category:

OAK-SoM OAK-SoM can be used to integrate the power of DepthAI into custom products, leveraging our open-source software and hardware (see our Github). OAK System on Module (SoM) allows integration into top-level systems with a need for low-power, high-performance, real-time AI and depth perception. Core digital electronics in the SoM include: Movidius Myriad X VPU 32 MB QSPI NOR flash 32 kb I2C EEPROM 16 GB eMMC 5.1 flash device Please note that the tray with 25 pcs does not include heatsinks, screws, or TIM. Description Important note: This System on Module cannot be used standalone; it requires a carrier board and connection to a host processor running Linux, macOS, or Windows. The OAK-SoM-Pro is a System on Module (SoM) designed for integration into top-level systems with a need for a low-power, high performance, real-time AI, and depth perception. It is ideal for use in industrial automation, robotics, and security systems. The OAK-SoM-Pro interfaces with the system through two 10-Gbps-rated 100-pin board-to-board mezzanine connector which carries all signal I/O as well as 5v input. The on-board SMPS system regulates the 5V input and provides all necessary digital and analog power. An auxiliary power port is offered to interface without connection to a baseboard. OAK design guide Key Features RVC2 architecture on-board features: 4 TOPS of processing power (1.4 TOPS for AI – RVC2 NN Performance) Run any AI model, even custom architected/built ones (models need to be converted) Encoding: H.264, H.265, MJPEG – 4K/30FPS, 1080P/60FPS Computer vision: warp (undistortion), resize, crop via ImageManip node, edge detection, feature tracking. You can also run custom CV functions Stereo depth perception with filtering, post-processing, RGB-depth alignment, and high configurability Object tracking: 2D and 3D tracking with ObjectTracker node General information 512 MB RAM (4GBit) Interfaces with the system through two 10-Gbps-rated 100-pin connectors (DF40C-100DP-0.4V(51)) 2 x 2-lane MIPI channels 2 x 4-lane MIPI channels (for multiple camera inputs) USB 3.1 Gen 2 Multiple Boot Modes supported: NOR, USB, Ethernet (EEPROM), or eMMC SD-card supported Design files produced with Altium Designer 20 Specification Dimension: 30x45x4.53mm Weight: 4g Power consumption: up to 5W Technical Details Dimensions Board layout Datasheet Temperature The ambient operating temperature of RVC2 based devices is between -20C and 50C when fully utilizing the VPU. To find out more, see our operating temperature range documentation. Power consumption Most of the power is consumed by the RVC2, so the power consumption mostly depends on the workload of the VPU: Base consumption + camera streaming: 2.5W – 3W AI subsystem consumption: Up to 1W Stereo depth pipeline subsystem: Up to 0.5W Video Encoder subsystem: Up to 0.5W So the total power consumption can be up to ~5W if you are using all the features at 100% at the same time. To reduce the power consumption, you can reduce FPS of the whole pipeline – that way, subsystems wont be utilized at 100% and will consume less power. Package Includes The 5pcs box contains: System on Module – 5 pcs Heatsinks, screws, TIM The 25 pcs tray contains: System on Module – 25 pcs Please note that the tray with 25 pcs does not include heatsinks, screws, or TIM.

Add a Review

Your email address will not be published. Required fields are marked *

Related Products