Shopping Cart

Menu

Conversions Tech Tinned Copper Compression Lug 2/0 AWG, 3/8 Stud

Conversions Tech Tinned Copper Compression Lug 2/0 AWG, 3/8 Stud

Original price was: $10.00.Current price is: $6.00.

Availability: In Stock

Conversions Tech Tinned Copper Compression Lug 2/0 AWG, 3/8 Stud

The Conversions Tech Tinned Copper Compression Lug is a seamless tubular, heavy-duty electrical connector engineered for 2/0 AWG copper conductors and a 3/8 stud interface. Manufactured from high-purity copper and fully tin plated, this lug delivers excellent electrical conductivity, corrosion resistance, and long-term mechanical stability in high-current power distribution applications.

The seamless barrel construction ensures uniform compression during crimping, reducing electrical resistance while improving pull-out strength and vibration resistance. The 3/8 stud ring is ideal for battery terminals, bus bars, grounding points, inverters, and industrial distribution blocks where standard hardware sizes are used.

Key Features

  • Seamless tubular copper barrel for consistent compression and low joint resistance
  • Tin-plated finish for corrosion resistance and stable long-term contact
  • Designed for 2/0 AWG copper conductors
  • 3/8 stud hole for secure bolted terminations
  • Rated up to 600V for power distribution and DC applications
  • High mechanical strength for vibration and thermal cycling environments

Technical Specifications

Wire Range 2/0 AWG
Stud Size 3/8
Stud Hole (Nominal) 0.390
Material Seamless Copper
Finish Tin Plated
Maximum Voltage 600V
Construction Type Seamless Tubular
Application Copper Cable Only

Dimensions

All dimensions shown in inches. For this 2/0 AWG seamless tubular series, lug body and barrel geometry remain consistent across stud sizes, with the stud hole changing to match the 3/8 stud version.

Overall Length (L) 2.180
Width (W) 0.880
Pad Thickness (T) 0.104
Tube Thickness (TT) 0.054
Barrel Length (BL) 0.800
Barrel Inside Diameter (ID) 0.490
Pad Length 1.000
Strip Length 0.790
Stud Hole (Nominal) 0.390

Typical Applications

  • Battery cable terminations (marine, RV, industrial)
  • Power distribution and DC bus bars
  • Renewable energy systems (solar, inverters, battery banks)
  • Industrial equipment wiring and grounding
  • Backup power, telecom DC, and energy storage systems

Installation Notes

  • Use a hydraulic or dieless compression crimp tool rated for 2/0 AWG copper lugs
  • Strip conductor insulation to the specified strip length before crimping
  • Do not use with aluminum conductors
  • Seal with adhesive-lined heat shrink for outdoor or corrosive environments

Frequently Asked Questions (FAQs)

What wire size is this compression lug designed for?

This lug is designed specifically for 2/0 AWG copper conductors.

What stud size does this lug fit?

It is designed for a 3/8 stud and uses a nominal 0.390 stud hole.

Is this lug seamless or welded?

This is a seamless tubular compression lug, providing uniform compression and strong mechanical performance.

Why is this lug tin plated?

Tin plating improves corrosion resistance, reduces oxidation, and helps maintain stable electrical contact over time.

What voltage rating does this lug support?

This lug is rated for applications up to 600V.

What crimping tool should be used?

Use a hydraulic or dieless compression crimp tool rated for 2/0 AWG copper lugs and follow tool manufacturer guidance.

What is the recommended strip length?

The recommended strip length is 0.790 to ensure full conductor insertion.

Can this lug be used outdoors?

Yes. For wet or corrosive environments, sealing with adhesive-lined heat shrink is recommended.

Is this lug suitable for aluminum wire?

No. This lug is designed for copper conductors only.

Do dimensions change across stud sizes?

Within this 2/0 AWG seamless tubular series, the primary dimensional change is the stud hole size. Always verify hardware clearance for your application.

Add a Review

Your email address will not be published. Required fields are marked *

Related Products