Shopping Cart

Menu

Conversions Tech Copper Compression Lug 2/0 AWG, 3/8″ Stud (Non-Tinned / Bare Copper)

Conversions Tech Copper Compression Lug 2/0 AWG, 3/8″ Stud (Non-Tinned / Bare Copper)

Original price was: $15.00.Current price is: $6.00.

Availability: In Stock

Conversions Tech Copper Compression Lug 2/0 AWG, 3/8″ Stud (Non-Tinned / Bare Copper)

The Conversions Tech Copper Compression Lug is a seamless tubular, heavy-duty electrical connector engineered for 2/0 AWG copper conductors and a 3/8″ stud termination. Manufactured from high-purity bare (non-tinned) copper, this lug provides low electrical resistance, high current-carrying capacity, and reliable mechanical performance for controlled or indoor power distribution applications.

  • 2/0 AWG copper conductor range for high-current systems
  • 3/8″ stud ring tongue for compact, secure bolted connections
  • Seamless tubular barrel for uniform compression and gas-tight terminations
  • Bare copper (non-tinned) finish for maximum electrical conductivity
  • Rated up to 600V for AC and DC power distribution
  • Designed for vibration and thermal cycling environments

High-Current 2/0 Copper Lug for 3/8″ Stud Terminations

This 2/0 AWG copper compression lug utilizes a seamless tubular barrel that compresses evenly around the conductor, creating a gas-tight electrical interface with minimal contact resistance and excellent pull-out strength. This design ensures long-term performance in demanding electrical and grounding systems.

The 3/8″ stud interface is widely used on battery terminals, bus bars, grounding points, switchgear, and power distribution blocks where a balance of compact size and mechanical strength is required. The non-tinned copper construction makes this lug ideal for controlled indoor or protected environments.

Key Features

  • Seamless tubular copper barrel ensures consistent crimp performance
  • Non-tinned (bare) copper for maximum electrical conductivity
  • Designed for 2/0 AWG copper conductors
  • 3/8″ stud hole for secure bolted electrical connections
  • 600V maximum voltage rating
  • High mechanical strength for vibration and thermal cycling environments

Technical Specifications

Wire Range 2/0 AWG
Stud Size 3/8″
Stud Hole (Nominal) 0.390″
Material Seamless Copper (Non-Tinned)
Finish Bare Copper
Maximum Voltage 600V
Construction Type Seamless Tubular
Application Copper Cable Only

Dimensions (inches)

For this 2/0 AWG seamless tubular lug series, lug body and barrel geometry remain consistent across stud sizes. Only the stud hole diameter changes for the 3/8″ stud configuration.

Overall Length (L) 1.980″
Width (W) 0.900″
Pad Thickness (T) 0.095″
Tube Thickness (TT) 0.050″
Barrel Length (BL) 0.720″
Barrel Inside Diameter (ID) 0.460″
Pad Length 0.980″
Strip Length 0.720″
Stud Hole (Nominal) 0.390″

Typical Applications

  • Battery banks and high-current DC systems
  • Bus bars and power distribution blocks
  • Grounding and bonding systems
  • Industrial and commercial electrical panels
  • Controlled-environment electrical rooms

Installation Notes

  • Use a hydraulic or dieless compression crimp tool rated for 2/0 AWG copper lugs.
  • Strip insulation to the specified 0.720″ strip length before crimping.
  • For copper conductors only; do not use with aluminum wire.
  • For outdoor or corrosive environments, use a tin-plated lug or seal with adhesive-lined heat shrink.

Frequently Asked Questions (FAQs)

What wire size is this compression lug designed for?

This lug is designed for 2/0 AWG copper conductors.

What stud size does this lug fit?

It fits a 3/8″ stud with a nominal hole diameter of 0.390″.

Is this lug tinned?

No. This version is non-tinned (bare copper).

What voltage rating does this lug support?

Rated up to 600V for AC and DC applications.

Is this lug suitable for aluminum wire?

No. This lug is intended for copper conductors only.

Note: Specifications are subject to change without notice. Always verify fitment, tooling compatibility, and application requirements prior to installation. For OEM programs, private labeling, or volume pricing, contact Conversions Tech.

{ “@context”: “https://schema.org”, “@type”: “Product”, “name”: “Conversions Tech Copper Compression Lug 2/0 AWG, 3/8\” Stud (Non-Tinned / Bare Copper)”, “description”: “Seamless tubular copper compression lug for 2/0 AWG copper conductors with a 3/8\” stud termination. Bare copper construction for maximum conductivity. Rated up to 600V for high-current power distribution.”, “brand”: { “@type”: “Brand”, “name”: “Conversions Tech” }, “category”: “Electrical > Wire & Cable > Lugs & Terminals > Copper Compression Lugs” }

Add a Review

Your email address will not be published. Required fields are marked *

Related Products